P25 Repeaters
700 MHz channel-selective · +40 dBm fibre-coupled · off-air and BTS-coupled
The TETRA and P25 product lines are not third-party certified yet. Where a project timeline allows, we can assess the certification path, lead time and cost against your specific band, power and interface requirements. If your tender explicitly requires existing certificates, tell us and we will be straight with you about what is feasible.
OEM private-label manufacturing and ODM design are both available. Regional distribution is not currently offered.
P25 Repeaters — what the line covers
A P25 product line covering 700 MHz channel-selective units and +40 dBm fibre-coupled configurations in both off-air and BTS-coupled versions. Compatible with P25 Phase 1 and Phase 2. Not third-party certified yet; where a project timeline allows, we can assess the certification path — including FCC-recognised laboratory testing for North American projects.
- 700 MHz
- 800 MHz (806.6–810.6)
+37 dBm · +40 dBm
- Off-air (RF)
- Fibre-coupled (MU/RU)
- BTS-coupled
Compatibility is stated for the cited model; confirm the exact combination against the model datasheet before ordering.
Models on this line
Parameters below are taken from the model datasheet. Where a figure has not been verified against the document body it is marked accordingly rather than estimated.
KT-P-72C-16
Internal model: KT-T700RP-CH16-P37-B
- Channel-selective, software programmable, FPGA-based fully digital booster
- Up to 16 channels with per-channel ON/OFF
- Per-channel and per-timeslot automatic gain control; uplink squelch per channel
- Full duplex with high uplink-to-downlink isolation
- Auto-diagnostic and automatic operation
- Local and remote monitoring with automatic fault alarm (optional)
- IP67 / NEMA 4X weatherproof for all-weather installation
Verified parameters and datasheet
| Standard | TETRA / TETRAPOL / P25 (Ph1 and Ph2) |
| Frequency band | 700 MHz |
| Output power class | +37 dBm |
| Channel count | 16 channels |
| Ingress protection | IP67 / NEMA 4X |
| Internal model | KT-T700RP-CH16-P37-B |
Source file: 700MHz P25 +37dBm Channel Selective Repeaters
KT-P-84CA
Internal model: KT-BDA800-P33
- SDR-based signal processing
- Fibre-coupled system: master unit to remote units over single-mode fibre
- Intelligent internal monitoring for fast fault location
- Low power consumption with efficient heat dissipation
Verified parameters and datasheet
| Frequency band | 806.6–810.6 MHz |
| Off-air BDA unit model | KT-BDA800-P33 |
| Master unit model | KT-DORP-CH8-MU |
| Remote unit model | KT-DORP-CH8-P40-RU-S |
| System architecture | SDR-based signal processing |
| Detailed electrical specs | Contact us for the full datasheet(to be confirmed) |
Source file: APCO - P25 +40dBm Off-air Digital Fiber Optic Repeater
How to read our model numbers
Every model encodes its standard, band, power tier, bandwidth type and coupling form. You do not need a lookup table to read it.
KT-{standard}-{band}{power}{bandwidth}{form}[-{channels}]Multi-band and multi-standard models use a group code after the standard (for example KT-L-B4Q-2BA = LTE, 380/900/1800/2100 MHz, 10–20 W, band-selective, off-air). A full one-page reference covering every code, including the models whose names are fixed by existing certificates, is supplied with the quotation on request.
Tell us the requirement, not the model
Send the band, power tier, bandwidth type, coupling form, channel count and project timeline. If certification is required for your tender, say so — we will tell you what is realistic rather than quoting a lead time we cannot meet.
Full datasheets for every model are available on request.