KT-28/8/3/1/W/78OP-B45/30/75/60/72/270-MU-24Six-band multi-operator fibre coverage system
Master unit for the six-band multi-operator fibre coverage system
The full parameter table below is taken from the official datasheet. The PDF version — with dimension drawings and the complete standard-compliance table — is released on request, so we can send the exact revision your project needs.
Kingtone JIMTOM® B28+B8+B3+B1+WIFI+N78 Fiber Optical Repeater Master Unit 20260720 datasheet
Overview
The master unit of the six-band multi-operator fibre coverage system. It receives the combined donor signal from the front end BDA over fibre and distributes it to the remote units. All six bands — B28, B8, B3, B1, WiFi and N78 — are carried on the same fibre path, so one infrastructure serves every operator and every service.
- Carries all six bands — B28, B8, B3, B1, WiFi 2.4 GHz and N78 — on one fibre path
- One set of equipment for multi-network integration, which is the cost argument
- Wide band design covering 698–3700 MHz
- Low power consumption, excellent heat dissipation
- Local and remote monitoring optional, with automatic fault alarm and remote control
Parameter tables
Values are transcribed from the KT-28/8/3/1/W/78OP-B45/30/75/60/72/270-MU-24 official datasheet. Where a range is given it is the datasheet's own range, not a rounded figure.
Radio
- Optical output power, per band
- −5 ± 2 dBm
- Frequency range B28 (uplink / downlink)
- 703–748 MHz / 758–803 MHz
- Frequency range B8 (uplink / downlink)
- 885–915 MHz / 930–960 MHz
- Frequency range B3 (uplink / downlink)
- 1710–1785 MHz / 1805–1880 MHz
- Frequency range B1 (uplink / downlink)
- 1920–1980 MHz / 2110–2170 MHz
- Frequency range WiFi
- 2412–2484 MHz (same band uplink and downlink)
- Frequency range N78
- 3300–3570 MHz (same band uplink and downlink)
- Working bandwidth B28 / B8 / B3 / B1
- 45 MHz / 30 MHz / 75 MHz / 60 MHz
- Working bandwidth WiFi / N78
- 72 MHz / 270 MHz
Mechanical and power
- Environmental class
- IP35
Monitoring
- Local and remote monitoring
- Optional, with automatic fault alarm and remote control
Indicators are based on ETSI standard testing. Availability varies depending on the laws and regulations of each country. Unless otherwise specified, all displayed specifications are typical and subject to change without prior notice.
- The datasheet does not state an environmental class (IP rating); the IP35 figure comes from the product team, not from the datasheet.
- The number of remote units this master unit drives, the RF input level and the maximum gain are cut off in the .doc file and are not quoted here. Ask us for the figures for a given deployment.
- The mechanical and power block (dimension, weight, power consumption, operating temperature) could not be read from the .doc file — it is not quoted rather than estimated.
Where our documents disagree with each other, we show both readings and confirm the value for your variant before you order. Tell us the model and band you need.
Certification status for this model is not recorded in this library. Do not state that it is certified without checking the certificate; ask us for the specific model number when you need the certificate.
See the certification register- Hotel and building multi-operator coverage
- Hospital campus multi-operator coverage
- Campus and industrial multi-operator coverage
- Tunnel and metro multi-operator coverage
- Stadium and event multi-operator coverage
- Transport hub multi-operator coverage
- Underground parking and lift-car multi-operator coverage
KT-28/8/3/1/W/78OP-B45/30/75/60/72/270-MU-24 datasheet and configuration quote
Two ways to proceed, depending on how far you are in your selection.
Download the datasheet
Leave a contact and the KT-28/8/3/1/W/78OP-B45/30/75/60/72/270-MU-24 PDF starts downloading straight away (EN / CN editions available). The link stays valid for 30 minutes. This is a technical datasheet — it does not commit you to anything.
The KT-28/8/3/1/W/78OP-B45/30/75/60/72/270-MU-24 datasheet PDF is released on request and is not yet enabled for direct download here. Use the quote form below and we will send it with a configuration proposal.
Request a configuration proposal
Tell us the band, the scenario and the quantity. A sales engineer replies with the matching datasheet revision, the certificate numbers for that variant, RF link budget guidance and a priced configuration.
- Datasheet PDF with dimension drawings
- Certificate numbers covering your variant
- RF link budget guidance for your scenario
- Compatible accessory and antenna options
Specification tables last reviewed 2026-10-15.